HDPE Tube Welding Machine

 

 

• Item No.: HDC355


• Welding Range: 110mm-355mm


• Welding Type: Hydraulic Pump Drive


• Brand Name: Neutral, HUAJIN or OEM


• Color: Red, Black and Customized


• Guarantee: 2 years quality warranty and spare parts factory cost.


• MOQ: No MOQ

 

 

Welding Requirements

a) The pipes to be welded must have physical/chemical characteristics which allow them to be fusing. This data must be provided and certificated by your pipe suppliers. Both pipes to be joined must have the same outside diameter and wall thickness.

b) The following conditions must exist:

In muddy, dirty, strong wind or low temperature environments, please use a tent for protection.

A tent should also be used for high ambient temperature areas.

For cold area, increase heater plate temperatures up to 20 degrees C above normal.

The pipe ends to be welded must be clean.

The pipe ends to be welded must have same temperature ( Avoid strong sunlight).

During welding (especially during cool down), avoid any collision or stress to the weld.

The open ends of pipes to be welded must be covered to avoid wind blowing into pipes.

Place the pipes on pipe supports to reduce drag.

 

 

 

 

 

 

 

 

 

 

 

 

 

http://www.huajinwelder.com/